A SERVICE OF

logo

Chapter 7 47
Graphics contained within this publication are for representation only.
Other Information
The picture is distorted
The disc might be damaged. Try another disc.
Picture is distorted during forward and reverse scan
It is normal for some distortion to appear while scanning.
A screen saver appears on the screen
•Your TV/DVD is equipped with a screen saver that appears on the screen after the DVD
mode has been idle for several minutes. Press STOP or GO BACK on the remote to
make the screen saver disappear from the screen and return to the DVD’s main menu.
Subtitle and/or audio language is not the one selected from the initial setting
If the subtitle and/or audio language does not exist on the disc, the initial settings will
not be seen/heard. The disc’s priority language is selected instead. Set the subtitle and/
or audio language manually through the Info Display or the DVD’s main menu.
The menu is displayed in a foreign language
The Menu Language preference is set to that language. From the DVD’s main menu,
select the Languages option (In Spanish, shown as Idiomas; in French, as Langues).
From the Languages menu, select the Player Menus option (In Spanish, shown as
Menús del Lector; in French, as Menus Lecteur). Highlight the language you prefer and
press OK.
No forward or reverse scan
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
If you’re trying to skip through the warning information and credits at the beginning
of a movie, you won’t be able to. This part of the movie is often programmed to
prohibit skipping through it.
Camera angle cannot be changed
Some discs don’t have the multi-camera angle system, and some discs only have it in
certain parts of the movie.
Picture is too tall and thin
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter
5).
Picture is too short and wide
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter
5).
Cannot copy discs to video tape
•You can’t record DVD discs onto videocassettes because the discs are encoded with
anti-copy protection.
Full Version of Disc Does Not Play
The DVD might be locked. To unlock see Chapter 5.
Disc won’t eject
When you put a disc into the disc tray, it may take up to 15 seconds to read the disc.
You won’t be able to eject the disc during this time. Wait 15 seconds and try again.