RCU4GLW Help Line
Trouble Shooting
If you need additional set-up help, please call the RCU4GLW Helpline at:
1-800-316-8756
P R O B L E M
Red light not blinking when you press any key
The RCU4GLW does not operate
your devices
Not performing commands properly
Problems programming a TV/VCR
Combo Unit
VCR not recording
Channel up and down do not function on
an RCATV
Problems changing channels
No response after pressing a key
Sleep feature does not work
S O L U T I O N
A)Replace the batteries (with fresh,
new AAAAlkaline batteries).
B) Check that batteries are properly
installed.
A)Try all the codes listed for your brand.
B) Try the Code Search method (page 11).
Start Code Search over again to locate
the proper code for full compatibility.
Try the VCR code for your brand. Some
combo units, however, may require both
a TV and a VCR code for full operation.
As a safety feature on your remote, you
must press the REC button twice.
Due to some designs, the original remote
will only perform these functions.
If your original remote required ENTER
after a channel, press ENTERafter you select
a channel.
A ) Make sure you have new batteries,
and you are aiming your remote at
your devices.
B) Check that batteries are properly
installed. See page 3.
Remote must remain aimed at television
after SLEEP is set in order for it to work.
13
Reprogramming may be required after batteries are removed.
