POWER
The POWER button operates the same as
your original remote (note: some RCA,
GE and Proscan models require you to
press the device key to turn the device on
and the power key to turn the device off).
MUTE
The MUTE
button operates
the same as on
your original
remote.
ENTER
The ENTER button
operates the same as
on your original
remote.
VOL & CHAN
The VOL(Volume) and
CHAN (Channel) buttons
operate the same as on your
original remote.
PRE CH
The PRE CH
(Previous Channel)
button operates the
same as on your
original remote.
Your remote requires four (4) new AAAalkaline
batteries. To install the batteries:
1. Turn the remote over and push down on the arrow
and slide the cover off.
2. Insert the batteries, matching the battery to the +
and - marks inside the battery case.
3. Press the battery cover back into place.
Note: Removing the batteries may require you to
reprogram the unit.
LIGHTBULB
The LIGHTBULB button is used to
control lighting the keypad and
conserving battery power. Press the
button and hold until the remote
lights up. The remote will then light
at the touch of any button. To turn
off the feature, press the LIGHTBULB
button a second time.
Battery Installation
