REVIEWING AND SEARCHING A RECORDING
basic recording
The Rec Search function works only in Camera mode.
➥
page 18
Used to review previously recorded images or to find a point to record a new image in the STBY mode.
Record Search
(
Joystick
)
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. To start recording, press the Recording start/stop button.
4. Set to STBY mode by pressing Recording start/stop button again.
5. To perform the backward search:
Move the Joystick (
) to the left.
- While you press and hold the Joystick (
), the selected images will be played
in reverse order. Press and release the Joystick (
) to play the images in
reverse order for 3 seconds before resetting the play order to normal.
To perform the normal search:
Move the Joystick (
) to the right.
- While you press and hold the Joystick (
), the selected images will be
played in normal order. To resume recording when your record search
is done, press the Recording start/stop button.
Mosaic shaped distortion may appear on the screen while in Record Search mode.
•
•
•
•
16BIt
60min
0:00:00
SP
16:9 Wide
