advanced recording
RECORDING A PHOTO IMAGE ON A TAPE -TAPE PHOTO RECORDING
Tape photo recording works only in Camera mode.
➥
page 18
You can record a photo image on a tape. The photo image is recorded and will take
up a 6~7 second section of tape.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the PHOTO button.
" REC " is displayed on the LCD screen, the photo image is recorded
for about 6~7 seconds.
4.
After the photo image has been recorded, the camcorder returns to its previous mode.
•
•
•
Tape Photo Recording takes about six or seven seconds, and
your camcorder returns to the standby mode. During the seven seconds,
you cannot record another photo image.
During the Tape Photo Recording, do not shake your camcorder.
Mosaic-pattern noise may appear on the image.
During the Tape Photo Recording, you can not set the following functions:
- "Visual Effect", "DIS" , "Digital Zoom", "C.Nite"
(After tape photo recording, most functions return to the previous mode.)
Tape Photo Recording does not work in the following situations:
- While recording movie images
- When "C.Nite" is set.
Your camcorder can also record photo images on a memory card.
➥
page 76
Press PHOTO button on the remote control. Pressing the PHOTO button
on the remote control records the tape photo image with automatic focusing
(SC-D382/D385 only)
•
•
•
•
•
•
<SC-D382/D385 only>
No Tape !
W T
C.Nite 1/30
12:00 1.JAN.2008
16:9 Wide
10Sec
16BIt
S
29
1/50
M
60min
3 SEC
SP
REC
