49
ESC E n
[Name] Turn emphasized mode on/off
[Format] ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
[Range] 32 ≤ n ≤ 255
[Description] Turns emphasized mode on or off.
• When the LSB of n is 0, emphasized mode is turned off.
•
When the LSB of n is 1, emphasized mode is turned on.
[Notes] * Printing is slower in emphasized mode.
•
Only the lowest bit of n is enabled.
• The printer does not emphasize bit-images.
•
This command and ESC ! turn on and off emphasized mode in the same
way. The last proceeded command becomes effective.
• Printer output is the same in double-strike (ESC G) and in emphasized.
[Default] n = 0
[Reference] ESC !, ESC G
50
ESC G n
[Name] Turn double-strike mode on/off
[Format] ASCII ESC G n
Hex 1B 47 n
Decimal 27 71 n
[Range] 0 ≤ n ≤ 255
[Description] Turns double-strike mode on or off.
• When the LSB of n is 0, double-strike mode is turned off.
•
When the LSB of n is 1, double-strike mode is turned on.
[Notes] * Printing is slower in double-strike mode.
•
Only the lowest bit of n is enabled.
• The printer does not double-strike for bit-images.
•
Printer output is the same in double-strike and in emphasized (ESC E).
[Default] n = 0
[Reference] ESC E
ESC J n
[Name] Print and feed paper
[Format] ASCII ESC J n
Hex 1B 4A n
Decimal 27 74 n
[Description] Prints the data in the print buffer and feeds the paper
[ n x 0.122mm {1/192 inches}] .
[Notes]
• After printing is completed, this command sets the print starting position to
the beginning of the line.
• This command has no effect on the line feed amount set by the "ESC 2"
command or the "ESC 3" command.
