11-3
Chapter 11 "SYSTEM" menu
▼Setting items
Communication parameter "COMM. PARAM"
This three interfaces that support this device are:
(1) Ethernet interface
(2) Parallel interface
(3) USB interface
This item is used to set up communication parameters by interface.
■ETHERNET
Specifies the Ethernet interface for communication. (Refer to Chapter
12.)
■PARALLEL
Specifies the parallel interface for communication.
Only when the parallel interface installed is displayed.
●TIMING MODE
Specifies the communication conditions (signal timing) for the parallel
interface.
<Parameter (choice input method)> : Default value
NORMAL/FAST/SLOW
When the NORMAL, FAST or SLOW parameter is selected, fixed
values listed in the table below are automatically specified.
Initial value of communication parameter (parallel)
metIedomtsaFedomlamroNedomwolS
gnimitEBORTSegdellaFegdellaFegdellaF
emit-noKCAcesn0094.2 µ ces6.3 µ ces
htgneleslupKCAcesn0094.2 µ ces3µ ces
gnimitffoYSUBegdeesirKCAegdeesirKCAegdeesirKCA
