Teledyne API Model 200AH NO
X
Analyzer Instruction Manual, 06492, Rev. G2
5-6
5.1.1. Sample Menu
Table 5-1: M200AH Sample Menu Structure
Level 1 Level 2 Level 3 Level 4 Level 5 Description
Reference
Section
TEST
TST>
Test functions 5.2.1,
Table 9-1
CAL Zero/Span calibration w/ gas through sample
port
5.2.2.1, 7.1
CALZ Zero calibration w/ zero gas from zero valve
option
5.2.2.3,
7.1, 7.2
CALS Span calibration w/ span gas from low or high
concentration span valve option
5.2.2.4,
7.1, 7.2
LOW/
HIGH
Only present if AutoRange is selected. Used
to select which range instrument will be
calibrated in. Selects which slopes, offsets,
expected span values, etc. will be updated and
displayed.
5.3.4.2, 7.8
ZERO Press ZERO then ENTR will zero analyzer 5.2.2.3,
7.1, 7.2
SPAN Press SPAN then ENTR will span analyzer 5.2.2.5,
7.1, 7.2,
5.2, 2.3
CONC Expected NO/NO
x
span concentrations and
Conv efficiency setup
Table 7-3
NOX
CONC
Enter expected NO
x
span concentration 5.2.2
Table 7-3
NO
CONC
Enter expected NO span concentration 5.2.2,
Table 7-3
CONV Sub-menu for converter efficiency setup and
verification
5.2.2.7,
7.11
NO2 Expected NO
2
concentration for converter
efficiency calculation
5.2.2.7,
7.11
CAL Automatic converter efficiency calibration
and entry
5.2.2.7,
7.11
SET Set the converter efficiency manually 5.2.2.7,
7.11
SETUP The SETUP Menu - See next table. Table 5-2
