A SERVICE OF

logo

Open as PDF
next previous
3
Feature Identification

Configuration DIP Switches:  
operation depending on your application. See Configuration
section for setting instructions.
Operating Mode Rocker Switch: controls Inverter/Charger
     
equipment receives constant, uninterrupted AC power. It also
enables the Inverter/Charger to be remotely monitored and
controlled with an optional remote module (Tripp Lite model
      
allows your batteries to return to full charge faster by turning the

Operation
section for setting instructions.
Operation Indicator Lights: intuitive “traffic light” signals
show whether the Inverter/Charger is operating from AC line
power or DC battery power. It also warns you if the connected
equipment load is too high. See Operation section for
instructions on reading indicator lights.
BatteryIndicatorLights: intuitive “traffic light” signals show
Operation section
for instructions on reading indicator lights.
DCPowerTerminals: connect to your battery terminals. See
BatteryConnection section for connection instructions.
HardwireACInput/OutputTerminalStrip(AccessPanel):
securely connects the Inverter/Charger to facility electrical
system. See Input/OutputConnection section for connection
instructions.
KnockoutsforACInput/OutputConduits
RemoteControlModuleConnector: allows remote monitoring

sold separately). See remote module owner’s
manual for connection instructions.
BatteryChargeConserver(LoadSense)Control: conserves
battery power by setting the low-load level at which the Inverter/
Charger’s inverter automatically shuts off. See Configuration
section for setting instructions.
MainGroundLug: properly grounds the Inverter/Charger to
earth ground. See BatteryConnection section for connection
instructions.
Thermostatically-Controlled Cooling Fans: quiet, efficient
fans regulate internal temperature and prolong equipment

and load.
Remote Generator Start Connector: automatically cycles
generator based on battery voltage. Use with user-supplied
cable. See Configuration section for more information.
RemoteBatteryTemperatureSensingConnector: prolongs

Contact Tripp Lite for optional temperature sensing cable
accessory. See Configuration section for more information.
1
2
3
4
5
6
7
8
9
10
11
12
13
1
2
4 3
5
9
10
11
13
8
12
6
7
On Side,
Not Shown