7.3 Setting Printout Format Options
Setting the printout options will determine what information will be
transmitted out the RS-232 port after a measurement. Listed below are the
available options that can be set followed by selection procedure.
Format - determines if the measurement data is output in "Spectral Data"
(400nm - 700nm in 10nm increments), or "Color Space Data" (L*a*b*,
etc.).
Print Header - enables or disables the header (L*a*b*, etc.) from printing
during a data transmit.
Print Reference - enables or disables the reference data from printing (if
any) during a data transmit.
To configure Printout Format options:
The configuration can be exited at any time by
pressing [FUNCTION] key and [SETUP] key
simultaneously.
1) Press the [FUNCTION] key and
[SETUP] key simultaneously.
2) Press [FUNCTION] (no) four times.
E .85
FUNCTION SETUP REF
a* -.24
b* -.31
L* +.76
FUNCTION SETUP REF
no yes
CALIBRATE ?
PRESS FOUR TIMES
7-7
➩
