12
Connections
This unit includes a Dolby Digital decoder. This enables the
playback of DVDs encoded with Dolby Digital without the need
for an external Dolby Digital decoder. When this unit is
connected to an AV amplifier with 6 channel input terminals,
you can enjoy theater-like surround sounds in your home when
playing back discs encoded with Dolby Digital.
Notes
•
After connections are completed, change the settings of “3
Speaker” on the SET UP menu according to your speaker
system. (See page 62.)
•
When you play back a disc recorded in 2 channel stereo, the
signals are output from the 6CH DISCRETE MAIN terminals
only.
•
You can also connect the OPTICAL or COAXIAL DIGITAL
AUDIO OUT terminal to the amplifier if the amplifier has the
corresponding digital input terminal(s).
If either of those terminals is connected to the amplifier
which does not include a Dolby Digital, MPEG or DTS
decoder, use “1 Digital Output” on the SET UP menu to
select the “PCM” mode for “Dolby Digital” and “MPEG”, and
select the “OFF” mode for “DTS”. (Refer to page 59 for
details.)
Ⅵ Connecting to an AV amplifier (or receiver) equipped with 6 channel input
terminals
For China and General models only
This unit (General model)
To AC outlet
AV amplifier or receiver equipped
with 6 channel input terminals
Main speaker
(Left)
Center speaker
Main speaker
(Right)
Subwoofer
Rear (surround) speaker
(Left)
Rear (surround) speaker
(Right)
Refer to pages 14-15 for VIDEO
OUT terminal connections.
