6-7
On-Command differential gear lock switch
“4WD”/“LOCK”
1. On-Command differential gear lock switch “4WD”/“LOCK”
2. Differential gear lock lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command four-
wheel-drive switch is set to “4WD”, move the
differential gear lock lever to position b, and
then set the switch to “LOCK”. When the dif-
ferential gear is locked, the differential gear
lock indicator light (“DIFF. LOCK”) will come
on along with the differential gear lock indica-
tor “” in the multi-function display. To re-
lease the differential gear lock, stop the
vehicle and set the switch to “4WD”.
● When the switch is set to “LOCK”, the dif-
ferential gear lock indicator and indicator
light will flash until the differential gear is
locked.
● When the indicator and indicator light are
flashing, turning the steering wheel back
and forth will help the differential gear lock
to engage.
DIFF.
LOCK
EE.book Page 7 Thursday, September 6, 2007 4:28 PM
