A SERVICE OF

logo

Open as PDF
next previous
WPA-PSK (Pre-Shared Key)
If all of the wireless devices in your network DO NOT support the
recommended WPA2-PSK, select WPA-PSK.
1 In the Privacy Configuration window, click the
Authentication Mode drop-down arrow and select WPA-
PSK.
2 At Encryption Mode, accept the default: TKIP (Temporal
Key Integrity Protocol).
3 In the Pre-shared key [WPA] area, enter the same network
key that is used on the wireless access point. We advise a
key with a minimum of 20 random characters.
4 Click OK to save your settings and return to the
Configuration tab.
5 On the Configuration tab, click Apply.
6 Click the Close box to exit the configuration software.
15
Chapter 2: Setting Security