Advanced Configuration
To access this window, click the Advanced button on the
Configuration tab.
•
Wireless Mode:
• Power Save Enabled: When
you select this option, the
Wireless-G USB adapter
immediately signals the access
point that it is in Power Save
mode. The access point buffers
all packets until it is polled by
the adapter.
Note: The access point you use
must also support Power Save.
•
Frag (Data fragmentation)
Threshold: If your adapter
often transmits large files, you
can set a limit on packet size. If
the limit is exceeded, the
adapter will split the packet.
The default is Disabled (2346).
• Country Roaming:
Appendix A: TCP/IP Settings 33
