Chapter 22 Static Route
NBG4615 User’s Guide
182
22.2 IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
Figure 117 Network > Static Route
The following table describes the labels in this screen.
Table 73 Network > Static Route
LABEL DESCRIPTION
Static Routing Settings
Route Name Enter a the name that describes or identifies this route.
Destination IP
Address
Enter the IP network address of the final destination.
IP Subnet
Netmask
This is the subnet to which the route’s final destination belongs.
Gateway IP
Address
Enter the IP address of the gateway.
Metric Assign a number to identify the route.
Interface Select the interface through which the traffic is routed.
Add Rule Click this to add the IP static route.
Application Rules Summary
No. This is the number of an individual static route.
Active The rules are always on and this is indicated by the icon.
Name This is the name that describes or identifies this route.
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the
same network segment as the device's LAN or WAN port. The gateway helps
forward packets to their destinations.
Metric This is the number assigned to the route.
Delete Click the Delete icon to remove a static route from the NBG4615. A window
displays asking you to confirm that you want to delete the route.
Cancel Click Cancel to begin configuring this screen afresh.
