Filter
Top Products
7
Ethernet Hub 16C—Rear
Power Adapter
socket
Only use the power
adapter that is supplied
with this OfficeConnect
hub. Do not use any
other adapter.
Coaxial port
Can be used to connect
your hub to other
OfficeConnect hubs and
equipment with
10BASE-2 (Coaxial)
cabling.
Uplink/Normal switch
Affects the operation of port 16. If you
are connecting a hub to the port, set to
Uplink (in), otherwise set to Normal (out).
See the “Connecting OfficeConnect
Hubs Together” section.
Sixteen 10BASE-T RJ-45 ports
Use suitable TP cable with RJ-45 connectors. You can
connect the OfficeConnect hub to any workstation or
OfficeConnect hub that has a 10BASE-T port. See the
“Connecting OfficeConnect Hubs Together” section.
10BASE-T
16
8X
9X
1X
POWER
Uplink/Normal
COAX
3C16702.book Page 7 Tuesday, July 13, 1999 10:16 AM