Filter
Top Products
LAN Settings 45
The LAN Settings screen is used to specify the LAN IP address of your
Gateway, and to configure the DHCP server.
1 Select Unit Configuration and then specify the Gateway IP Address and
Subnet Mask in the LAN Settings field. The default IP address of the
Gateway is 192.168.1.1.
2 If you want to use the Gateway as a DHCP Server, click in the Enable
check box.
3 Clicking Auto Range will automatically choose the largest available range
of addresses for your network.
4 Check all of your settings, and then click Apply.
The DHCP server will give out addresses to both wired and wireless
clients.
DHCP Clients List
Figure 31 DHCP Clients List Screen
The DHCP Clients List provides details on the devices that have received IP
addresses from the Gateway. The list is only created when the Gateway is
set up as a DHCP server. For each device that is connected to the LAN the
following information is displayed:
■ IP address — The Internet Protocol (IP) address issued to the client
machine.
■ Host Name — The client machine’s host name, if configured.
■ MAC Address — The Media Access Control (MAC) address of the