Filter
Top Products
Windows NT 4.0 Driver Installation Procedure 9
Windows NT 4.0 Driver Installation Procedure
1 From the Windows desktop, select "Control Panel,"
double-click "Network," click "Adapters," and then
click the "Add" button on the Network dialog box.
2 Windows NT will present a list of all its supported
adapters. Click "Have Disk" to continue.
3 Windows NT will ask for the drive/path containing
the Windows NT drivers. Insert the CD into the drive,
specify the drive letter of the CD, then click "OK."
4 When prompted, select 3Com 3CRWE777A WLAN PCI
adapter, then click "OK."
5 Windows NT will attempt to locate the SYS and INF
files in the specified path. If you have entered the
path name correctly, Windows NT should copy the
appropriate drivers to the Windows NT system. You
must confirm the selection by clicking "OK."
6 The Adapter Properties dialog box appears. Configure
the card as described below, and click "OK."