Filter
Top Products
3-14 CHAPTER 3: CONFIGURATION USING TRANSCEND ACCESSBUILDER MANAGER (TABM)
3 At this point, you will want to change TABM’s login password from the
default to your own. From the Administration menu, choose Change
Password [Alt]+[A]+[C]. The Change Password dialog box appears.
4 In the Old Password edit box, type the default password: admin
5 In the New Password and Confirm Password edit boxes, type the new
password you want to assign to the TABM application.
6 Choose the OK button.
Starting Up a New
AccessBuilder
Server
IP Networks
When you run the TABM application (in a window or minimized as an
icon), it launches TABMTOOL to “listen” in the background for
configuration requests from new AccessBuilder servers (that is, servers
that have not yet been configured). When you connect such a server to
the network and power it up, the server sends configuration requests
(BootP requests) to the network which are intercepted by the
TABMTOOL.
Make sure the AccessBuilder is powered on after TABM is running. If
TABM is launched after the AccessBuilder has been power on, the
AccessBuilder’s BootP request will be missed.
Upon receiving a request for configuration parameters, the TABMTOOL
utility displays the AccessBuilder Configuration Parameters dialog box.
Use this dialog box to provide the following basic configuration
parameters:
■ IP address of the AccessBuilder
■ IP address of the system running the TABM application
■ Subnet mask for the AccessBuilder
■ Default gateway for the AccessBuilder (optional)
■ Super user password
IPX Networks
The AccessBuilder Manager can auto discover the AccessBuilders on the
LAN without knowing the IPX address of the management workstation
on which it is running. All servers, including those on different subnets
that respond are added to the All Servers List View window.
ab4kbook Page 14 Thursday, March 27, 1997 11:51 AM