Filter
Top Products
12 CHAPTER 1: UNPACKING INSTRUCTIONS
3 As shown in Figure 1, remove the module from its antistatic bag by
grasping it on the faceplate. Do not touch traces, chips, or other
components on the circuit board at any time.
Figure 1 Unpacking a Module Carefully
4 Examine the module for obvious signs of damage.
If damage is apparent, follow the instructions in step 1.
If no damage is apparent, replace the module in its antistatic bag.
5 Leave the module in its antistatic bag until you are ready to install it.
6 Read the Switch 4005 Installation and Maintenance Guide for important
safety information and instructions for installing and removing modules.
A printed copy of this guide is included in all chassis shipping boxes.
Alternatively, you can download a copy of this guide from the 3Com Web
site. Click the “Find Documentation” link on this page:
http://support.3com.com/index.htm