Filter
Top Products
14 CHAPTER 1: PRODUCT INTRODUCTION
Introduction to the
Switch 4210 Family
Non-PWR Models
This section describes each Switch 4210 Family model.
Switch 4210 9-port Front panel
The Switch 4210 9-port model provides eight 10/100Base-TX autosensing
Ethernet ports, one 10/100/1000Base-T autosensing Ethernet port, one
100/1000Base-X SFP port, and one Console port. The SFP port and the
10/100/1000BASE-T autosensing Ethernet port form a Combo port. For the
Combo port, either the SFP port or the 10/100/1000BASE-T Ethernet port can be
used at a time.
Figure 10 shows the front panel of the Switch 4210 9-port model.
Figure 10 The Switch 4210 9-port model’s front panel
.
1000 Mbps uplink port
active LED
ACT BLINKING The port is in the active state and
there is traffic on the port.
OFF The port is in the active state but
there is no traffic on the port.
Table 5 The 1000 Mbps uplink port status LED on 4210 PWR models
LED
Mark on the
panel Status Description
(1) 10/100Base-TX autosensing port Speed LED (green)
(2) 10/100Base-TX autosensing port (3) Combo port Speed LED (green)
(4) 10/100/1000Base-T autosensing port (5) Console port
(6) 100/1000Base-X SFP port (7) Link/Act LED (green)
(8) Power LED (PWR)
(
1
)
(
2
)
(
4
)
(
5
)
(
6
)
(
7
)
(
8
)
(
3
)
(
7
)