Filter
Top Products
Rack-Mounting the Switch 25
Figure 17 Installing the switch in a 19-inch rack
Mounting the front
bracket
Mount the front bracket as shown in Figure 18 and Figure 19.
Figure 18 Mount the front bracket to the device
Figure 19 Mount the front bracket to the mount angel of the rack
Mounting the rear
bracket
The Switch 4210 26-Port does not need rear brackets. The description for
mounting rear brackets is only for the Switch 4210 PWR 24-Port.
Mount a screw on the back of the switch to closely connect the switch with the
rear bracket to support the switch. There are three positions for screw mounting
as shown in Figure 20.
Front
bracket
Screw
Front
bracket
Screw
Screw
Front mount angle
Front
bracket
Screw
Front mount angle
Front
bracket