Filter
Top Products
Installation and Troubleshooting 2 - 9
Figure 2-2. Rack Mount Positions
Follow the steps below to mount the cable tray in your rack:
1. Attach the two rack mount flanges to the cable tray in the position
you want as shown in Figure 2-2 using the eight (8) provided 8-32 x
1/4" flathead screws - four per side.
Note: You must tighten the screws completely to be flush
with the rack mount flanges so the tray will fit in the
rack.
2. Select a vacant position in the rack that is at least 10.5 inches (26.7
cm) from the top of the rack or the next higher unit in the rack.
3. Install the provided clip nuts onto the front of the rack where you
want to attach the tray.