Filter
Top Products
GBIC Operation 29
Figure 7 Inserting a GBIC Transceiver
3 The transceiver connects to the network using a duplex SC connector.
Attach a male duplex SC connector on the network cable into the duplex
SC connector on the transceiver.
4 Connect the other end of the cable to a device fitted with an appropriate
Gigabit Ethernet connection.
5 Check the LEDs on the front of the Switch to ensure that it is operating
correctly. Refer to “LEDs”
on page 15 for more information.
GBIC Ports
GBIC
Transceiver
erstack3 Switch4228G
DUA1730-0AAA02.book Page 29 Thursday, January 23, 2003 12:28 PM