Filter
Top Products
DK8X Motherboard
EPS12V POWER CONNECTORS
Find the proper orientation of the connectors and push down firmly to make sure that the
pins are aligned (the connector will only insert properly when properly aligned). The
8-pin connector is a dedicated power connector to supply power for the CPUs. For Wake
on LAN support, the 5-volt Stand-by lead (+5VSB) from the ATX power supply must
supply at least 2A.
EPS12V PSU Only
IMPORTANT
It is recommended that you use an ATX Power Supply that complies with the Intel ATX
2.03 specification.
________________________________________________________________________
2-16 Hardware Installation