Filter
Top Products
5
Lynx L-510
Quick Guide
Introduction
Thank you on your purchase of the Lynx L-510! The Lynx L-510 provides you with a
high-speed broadband Internet connection using your existing phone line that at the
same time allows you to make phone calls.
The Lynx L-510 can be connected to any computer/notebook with a USB Port or 10/100
Base-T Ethernet card for wired connection or an IEEE 802.11b/g Wireless adapter. For
multiple user connections, you may connect your computers/notebooks to both the
Ethernet Ports or through the Wireless adapter. The Ethernet ports have Auto
MDI/MDIX feature which can allows both cross or straight UTP cable to be utilized. The
Lynx L-510 has an in-built IEEE802.11g Wireless LAN Access Point for wireless
connectivity.
This documentation assumes that there is an Ethernet card or a wireless adapter on
your computer.
Minimum System Requirements
• Pentium
®
MMX 233MHz
• A CD-ROM Drive
• Ethernet card installed with TCP/IP Protocol (required only if you are connecting to
the ETHERNET port of your DSL Router)
• USB port (required by if you are connecting to the USB Port of your ADSL Router)
• IEEE 802.11b/g Wireless adapter (Required if you are connecting to the Wireless
Access Point of the router)
• Host Operating Systems support for USB:
Windows® 98 Second Edition
Windows® 2000
Windows® Me
Windows® XP
• OS independent for Ethernet
• Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)