Filter
Top Products
Regulatory Information
INTENTIONAL RADIATOR
INDUSTRY CANADA NOTICE (APPLICABLE FOR USE WITHIN CANADA)
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb.
AVIS DE CONFORMITÉ À LA RÉGLEMENTATION D’INDUSTRIE CANADA
Cet appareil est conform à la norme CNR-210 du Canada.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, cet appareil doit être utilisé à l’intérieur seulement
et devrait êtra placé loin des fenêtres afin de fournir un écran de blindage maximal.
L’installateur du présent matériel radio doit s’assurer que l’antenne est située ou pointée de manière à ce que cette derniére n’émette pas de
champs radioélectriques supérieurs aux limites spécifiées par Santé Canada pour le grand public; condulter le Code de sécurité 6, disponible
sur le site Web de Santé Canada, à l’adresse suivante: www.hc-sc.gc.ca/rpb.
SAFETY
This equipment has been evaluated according to the following safety standards and is intended for use only in Information Technology
Equipment which has been evaluated to these or other equivalent standards:
UL Standard 60950 / CSA C22.2 No. 60950
IEC 60950
EUROPEAN COMMUNITY CE NOTICE
Marking by the symbol indicates compliance of this equipment to the R&TTE Directive 1999/5/EC. Such marking is indicative that this
equipment meets or exceeds the following technical standards:
■
ETS 300 328 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission
equipment operating in the 2,4GHz ISM band and using spread spectrum modulation techniques
■
ETS 300 826 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for 3,4
GHz wideband transmission systems and High PErformance Radio Local Area Network (HIPERLAN) equipment
-- EN 55022 (1998) — Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
(CISPR 22 Class B).
-- EN 55024 (1998) — Information technology equipment - Immunity characteristics - Limits and methods of measurement.
■
ES 59005 — Considerations for the evaluation of human exposure to electromagnetic fields (EMFs) from mobile telecommunication
equipment (MTE) in the frequency range 30 MHZ - 6 GHz
■
EN 60950 — Safety of information technology equipment, including electrical business equipment
This device may be used throughout the European Community.
User Guide version 1.1.2
Published April, 2001
CAUTION:
FCC Radio-Frequency Exposure Notice
This device generates and radiate radio-frequency energy. In order to comply with FCC radio-frequency radiation exposure guidelines
for an uncontrolled environment, this equipment has to be installed and operated while maintaiing a minimum body to antenna
distance of 2.5 cm (1.0 inch).
This wireless product does not contain any user serviceable components. Any unauthorized product changes or modifications will
invalidate 3Com’s warranty and all applicable regulatory certifications and approvals.