Filter
Top Products
120 CHAPTER 12: COMMAND LINE INTERFACE
64 bytes from 192.156.136.22: icmp_seq=0 ttl=248 time=195.2
ms
If the device is not accessible, or is not functioning correctly, a message
similar to the following is displayed:
No answer from 192.156.136.22
Displaying IP
Summary
Information
You can display IP summary information for the Webcache using the
summary command on the IP menu.
To display the IP information, at the Top-level menu, enter:
protocol ip summary
The IP information for the Webcache is displayed.
An example of the IP information is shown below:
IP address: 196.168.100.1
Subnet mask: 255.255.255.0
Default router: 196.168.100.2
Host Name: webcache
Domain name: mycompany.com
DNS address: 196.168.100.3
Tracing IP Addresses The Trace Route feature allows you to display the network hops from the
Webcache to a device on an IP network. This feature is useful for testing
that the Webcache is installed and set up correctly, and that your network
connections are working.
You can perform a trace route to other devices on your network using the
traceRoute command on the IP menu.
1 At the Top-level menu, enter:
protocol ip traceRoute
The following prompt is displayed:
Enter destination IP address:
2 Enter the IP address of the device that you want to trace.
The Webcache sends a trace route request to the specified device and a
message similar to the following is displayed:
traceroute to 191.128.40.121, 30 hops max, 38 byte packets