Filter
Top Products
44 CHAPTER 4: RUNNING THE SETUP WIZARD
Routing Mode over ATM
The Routing Mode over ATM uses fixed/static IP addresses, which are
provided by your ISP, to connect to the Internet. Obtain the information
on this screen from your ISP.
Figure 30 Routing mode over ATM Screen
1 Enter your Internet IP address in the WAN IP field.
2 Enter the subnet mask in the Subnet Mask field.
3 Enter the default gateway IP address in the Default Gateway field.
4 Enter the DNS address in the DNS field.
5 Enter your VPI and VCI information in the VPI/VCI fields.
6 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down menu. This information should be provided to you by your ISP.
Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 32).