Filter
Top Products
46 CHAPTER 4: RUNNING THE SETUP WIZARD
Wizard - LAN Settings The LAN Settings screen allows you to set the default IP address and
DHCP client IP range for the Router.
Figure 32 The LAN Settings Screen
1 To change the Router’s default IP address, enter the new IP address in the
IP Address field, and then enter the subnet mask in the Subnet Mask
field.
2 Check the Enable DHCP Server box to enable the DHCP function.
3 Enter the client IP address range in the IP Pool Start Address and IP Pool
End Address fields. You can also click Auto IP Range to automatically set
the starting and ending IP address: 192.168.1.2 ~ 192.168.1.254.
4 Click Next. The Wireless Settings screen will appear (refer to Figure 33).