3M 390G Barcode Reader User Manual


  Open as PDF
of 14
 
10 11
1
Using the ConfigurationPage
Certain set‑up and configuration options are available on the password‑protected 3M™Attest™ Auto‑reader390G Web App Configuration page. Ideally, the 3M™Attest™
Auto‑reader390G should be empty (i.e., have no incubating BIs) when it is reconfigured. Navigate to the Configuration page by enteringeither:
1) http://attestxxxxxx/protect/config.htm (where xxxxxx is the 6‑digit unit serial number),or
2) http://xxx.xx.xxx.xx/protect/config.htm (where xxx.xx.xxx.xx is the IPaddress)
in the web browser address bar and pressing Go or Enter. A security screen will appear. Fillin the fields asfollows:
User name:manager
Password:Attest
and pressOK.
Click on the desired radio buttons to changesettings.
Language
Selected setting indicates language in which text on 3M™Attest™ Auto‑reader390G Web App pages will appear on the PC/mobile device
screen.
Pushbutton Configuration
Selecting Enable
allows the user to configure the 3M™Attest™ Auto‑reader390G from the buttons on the unititself.
Selecting Disable
prevents the user from being able to configure the 3M™Attest™ Auto‑reader390G from the buttons on the unit
itself.
Buzzer Configuration
Selecting Enable
enables the audible alarm. The speaker icon will appear on the 3M™Attest™ Auto‑reader390G LCDpanel.
Selecting Disable
disables the audible alarm. The speaker icon will disappear from the 3M™Attest™ Auto‑reader390G LCD panel.
AttestAuto‑reader 390G Nickname
Naming the 3M™Attest™ Auto‑reader390G may be useful in facilities with multiple units. The assigned nickname will appear on the
3M™Attest™ Auto‑reader390G Web App Status page.
Enable DHCP
Default: Setting is checked indicating the Web App will usethe Dynamic IP address automatically assigned when the 3M™Attest™
Auto‑reader390G is connected to the network. Remove the checkif you wish to use a Static IP address assigned by your facility IT.
IP Address Enter Static IP address assigned by IT.
Gateway Enter Gateway.
Subnet Mask Enter Subnet Mask.
Primary DNS Enter Primary DNS.
Use Computer Time Check this box if you wish to set the clock on‑board the 3M™Attest™ Auto‑reader390G using the computer’s clock.
Attest Auto‑reader390G Time
Alternatively, leave the Use Computer Time box uncheckedand complete the date and time boxes to set the
3M™Attest™Auto‑reader390G clock.
After changing desired settings, click on Save Config button to save your changes. Anew screen confirming the settings were successfully changedappears.
 previous next