Filter
Top Products
17
Replacing the battery
Removing the battery
1 From the Handheld software’s Home
menu, select Change Battery.
Important Note! - If you do not use
the Change Battery function, you
may lose collected data and/or
corrupt the memory card. Also, you
may have to reset the Handheld.
2 When the screen goes blank, it is
safe to remove the battery.
3 Push the battery tab down, away
from the battery.
4 Slide the battery out of the battery
holder.
Installing the battery
1 Insert the battery into the battery
holder as shown.
2 Make sure that the battery tab
securely holds the battery in place.
702_006
Press the
Battery
Tab
Remove the Battery
Remove the old battery
Select "Change Battery" from the main screen
Insert the Battery
Insert the new battery
Make sure that the
battery tab securely
holds the battery in place
1
3
2
Figure 12: Before removing a battery, select Change Battery.
WARNING
To reduce the risk associated with fire and explosion:
Do not attempt to use a damaged battery pack, charger, or
power supply;
Do not allow battery pack to come in contact with water;
Do not disassemble, crush, or incinerate the battery pack — at
the end of service life, dispose of the battery pack in
accordance to federal, state and local requirements;
Replace battery pack with Molicel MCR-1821 type battery
pack only;
Do not store the battery pack in areas that may exceed
temperatures of 100°C/212°F;
Use the charger with the supplied power supply only.
To reduce the risk associated with hazardous voltage
contained within the battery charger:
Do not use the charger or power supply if the case or cord are
damaged;
Do not use in outdoor or wet environments;
Do not attempt to service or repair the charger or power
supply — no user serviceable parts inside.