Filter
Top Products
17
3M
™
Personal Projector MP8746/MP8747
© 3M IPC 2000
How to Use Height Adjustment Foot
Section 4: Adjustments and Functions
Adjust the image elevation and projection angle (within 0 to 9°) using the height adjustment foot at the front
of the projector and the tilt adjustment knob at the rear of the computer.
1. Raise the front end of the projector so the foot is not touching the tabletop.
2. Push the lock button on the left side of the projector to unlock the foot.
3. Extend or retract the foot to the desired height.
4. Release the lock button to lock the foot into position.
5. For finer adjustment, rotate the tilt adjustment knob on the left rear foot of the projector.
Figure 4.1 Height Adjustment
Caution Do not unlock the foot adjuster if the projector is not supported.
Height
Adjustment
Foot
Lock
Button
Tilt
Adjustment
Knob
Screen Chart
Place the projector at the recommended distance from the screen, according to the desired image size in the
chart below.
a = distance from the projector
to the screen
The distances shown in the
chart are for full size
(1024 x 768).
✓
Note: These sizes are
±
10%, due to variations in the manufacture of the
lens. If you are close to an endpoint, you should verify that the
image is the proper size (1024 x 768) and at the proper distance.
For your own customized screen chart, please click here (on the CD-ROM) or visit our
Projector to Screen Calculator on the 3M web site (www.3m.com/meetings/screen/
7630_calc.html).
LAMP
TEMP
POWER
STANDBY/ON
INPUT
MUTE
RESET
MENU
K
a
Figure 4.2 Screen Angles and Screen Chart