Filter
Top Products
3M
™
Personal Projector MP8746/MP8747
24
© 3M IPC 2000
Cleaning the Air Filter
✔
Note: Clean the air filter about every 100 hours or if the message “CHECK AIR FLOW” is
displayed on the screen. If air is restricted due to dust accumulation on filter, the
projector may overheat and shut down automatically.
Turn off the MAIN POWER SWITCH of the projector and pull out power cord. Let cool for
20 minutes. Vacuum dust and dirt from filter. If the filter cannot be cleaned and needs to be replaced,
please consult your dealer.
Figure 5.1 Cleaning Air Filter
Section 5: Maintenance
K
Cleaning the Inner Components
For safety reasons, have your dealer check and clean inside the projector every two years. (Cleaning it
yourself can be hazardous.)
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.
Cleaning the Projector Case and Remote Control Transmitter
Gently wipe with a soft cloth. If necessary, slightly dampen cloth with water and/or a neutral detergent. Wipe
dry with a soft, clean cloth.
Caution
• Turn off the power and remove power cord from outlet before beginning any
maintenance work.
• Do not use projector without air filter.
• Do not use harsh detergents or chemicals (like benzene or thinners).
• Do not use cleaning sprays.