Filter
Top Products
3M
™
Multimedia Projector MP8780 © 3M 1999
ENGLISH
4
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you operate and maintain your 3M MP8780 Multimedia Projector.
LOCATION OF PRODUCT SAFETY LABELS
Safety labels are used on or within the 8780 projector to alert you to items or areas requiring your attention.
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
EXPLOSION
THE LAMP MAY EXPLODE WHILE IT IS LIT.
HANDLE THE LAMP CAREFULLY SO AS NOT TO DAMAGE IT.
CAUTION
ATTENTION
!
Important
This projection lamp contains mercury.
Consult your local hazardous waste
regulations and dispose of this lamp
in a proper manner.
DO NOT REMOVE SCREWS EXCEPT USER SERVICE SCREWS
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
REPLACE WITH THE SAME LAMP UNIT.
HIGH VOLTAGE
MAY CAUSE AN ELECTRIC SHOCK AND ULTRAVIOLET. REPLACE
THE LAMP AFTER FIRST REMOVING THE POWER PLUG FROM
THE OUTLET. THIS COVER IS PROVIDED WITH AN INTERLOCK.
DON'T DEFEAT THIS INTERLOCK.
""
DO NOT BLOCK THE VENTILATION HOLES (SIDE AND UNDERNEATH)
OF THE UNIT. THIS MAY CAUSE A FAILURE.
LISTED
UL 1950
685Z
E73930
Visual Systems Division
Austin, TX 78726-9000
AC100-240V
6.5A-2.7A
50/60HZ
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
LCD PROJECTOR
MOD NO.
MP8780
DO NOT STARE DIRECTLY
INTO THE PROJECTION LENS.
WARNING