![](http://pdfasset.owneriq.net/1/9c/19ccd9cc-bb6f-4584-a2a3-5a658939e53f/19ccd9cc-bb6f-4584-a2a3-5a658939e53f-bg22.png)
2-14 Chapter 2
(11). Floppy Disk Drive Connector [FDC1]
This connector supports two standard floppy disk drives via a 34-pin 34-conductor ribbon cable.
Connecting the Floppy Disk Drive Cable:
1. Install one end of the ribbon cable into the FDC1 connector. The colored edge of the ribbon cable
should be aligned with pin-1 of FDC1 connector.
2. Install the other end(s) of ribbon cable into the disk drive connector(s). The colored edge of the
ribbon cable should be also aligned with pin-1 of disk drive connector. The endmost connector
should be attached to the drive designated as Drive A.
SI7 Series