Filter
Top Products
G-2 Appendix G
6. Please set the first boot sequence as “Floppy” in BIOS and boot off the floppy disk.
7. Flash the BIOS in pure DOS mode.
A:\>amiflash sx7_89.rom
8. When the flash process is complete, you can see the completed message that will ask you to restart
your system
Note
• The AMI flash utility cannot be completed under the Windows environment. It must be done in a
pure DOS environment.
• You should check which BIOS file is to be used with your motherboard, don’ flash with the
wrong BIOS file. Otherwise, it may cause system malfunctions.
SI7 Series