Filter
Top Products
Fast EtherHub Installation Manual
13
TROUBLESHOOTING
This chapter contains information to help you solve problems. If these
hubs are not functioning properly, make sure they were set up
according to instructions in this manual.
If the hubs don
’
t connect to the network:
➊ Check the LINK/ACTIVITY LED lights on the front panel.
If the LINK/ACTIVITY LED isn
t lit, check all connections at the
adapter and the hub. Make sure the adapter drivers are loaded.
➋ Try another port on the hub.
➌ Make sure the cable is installed properly.
The network cable must be securely attached at all connection points. If
the cable is properly attached but the problem persists, try a different
cable.
❹ Turn off the unit
s power, wait a few seconds, and turn it back on.