Filter
Top Products
System Management Commands
4-49
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, February 1st, 2002.
show calendar
This command displays the system clock.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
System Status Commands
show startup-config
This command displays the configuration file stored in non-volatile memory that is
used to start up the system.
Default Setting
None
Console#calendar set 15:12:34 1 February 2002
Console#
Console#show calendar set
15:12:34 February 1 2002
Console#
Command Function Mode Pag
e
show startup-config Displays the contents of the configuration file (stored in flash
memory) that is used to start up the system
PE 4-49
show running-config Displays the configuration data currently in use PE 4-51
show system Displays system information NE, PE 4-53
show users Shows all active console and Telnet sessions, including user
name, idle time, and IP address of Telnet clients
NE, PE 4-53
show version Displays version information for the system NE, PE 4-54