Filter
Top Products
Basic Configuration
3-15
Note: Up to two copies of the system software (i.e., the runtime firmware) can be stored
in the file directory on the switch. The currently designated startup version of this
file cannot be deleted.
Downloading System Software from a Server
When downloading runtime code, you can specify the destination file name to
replace the current image, or first download the file using a different name from the
current runtime code file, and then set the new file as the startup file.
Web – Click System, Firmware. Enter the source and destination file names with
any other relevant details such as the IP address of the TFTP server if used, and
click Transfer from Server.
If you download to a new destination file, then select the file from the drop-down box
for the operation code used at startup, and click Apply Changes. To start the new
firmware, reboot the system via the System/Reset menu.
To remove an operating code file, select the file from the drop-down list and click
Remove File.