Accusys eXpeRAID Network Card User Manual


 
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007
PAGE 14 OF 27
3.3.2 Information Display Commands
3.3.2.1
Command Name Command Description
DumpArrayInfo Use this command to display information of the specified array.
Parameter 1 Parameter Description
Array No.:
Specified array number from 1 ~ 4 for information display.
Example
Array No.:
<1~4>
CLI>DumpArrayInfo 1 [Enter]
CLI will display the information of Array 1 if it exists.
T3.3.2.2T
Command Name Command Description
DumpSliceInfo Use this command to display slice information of the specified array.
Parameter 1 Parameter Description
Array No.:
<1~4>
Array No.:
Specified array number from 1 ~ 4 to display slice information.
3.3.2.3
Command Name Command Description
Use this command to display JBOD information of the active
controller.
Parameter Description
DumpJBODInfo
N
/A
3.3.2.4
Command Name Command Description
Use this command to display event(s) of the active controller. CLI will
display up to 32 latest events(if any) each time when this command has
been issued.
Parameter Description
DumpCtrlEvent
N
/A
3.3.2.5
Command Name Command Description
Use this command to display controller information of the active
controller.
Parameter Description
DumpCtrlInfo
N
/A