Filter
Top Products
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007
PAGE 23 OF 27
3.3.5.6
Command Name Command Description
CancelSplitSchedule Use this command to cancel split schedule for the specified mirror
snapshot.
Parameter 1 Parameter Description
Shot No.:
<1~8>
Shot No.:
Specify an existing mirror snapshot to cancel schedule.
3.3.6 Miscellaneous Commands
3.3.6.1
Command Name Command Description
DiskLagProof Use this command to enable or disable Disk Lag Proof mode. This
mode is only effective on RAID Level 5.
Parameter 1 Parameter Description
<Enable:Disable> Enable / Disable Disk Lag Proof mode.
3.3.6.2
Command Name Command Description
NCQMode Use this command to enable or disable NCQ(native command queue)
mode.
Parameter 1 Parameter Description
<Enable:Disable> Enable / Disable NCQ mode.
3.3.6.3
Command Name Command Description
SMARTMode Use this command to enable or disable SMART pre-failure warning
mode.
Parameter 1 Parameter Description
<Enable:Disable> Enable / Disable SMART pre-failure warning mode.