Filter
Top Products
ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007
PAGE 24 OF 27
3.3.6.4
Command Name Command Description
SMARTPollingPeriod Use this command to set the polling frequency of SMART pre-failure
warning mode.
Parameter 1 Parameter Description
Polling Time:
<1Min:15Min:30Min:
60Min:2Hr:4Hr:8Hr>
Polling Time:
Set Polling Time as the SMART polling period.
3.3.6.5
Command Name Command Description
BeeperMode Use this command to enable or disable the controller beeper.
Parameter 1 Parameter Description
<Enable:Disable> Enable/Disable controller beeper.
3.3.6.6
Command Name Command Description
EQMode Use this command to enable or disable Equalization Mode.
Parameter 1 Parameter Description
<Enable:Disable> Enable / Disable Equalization Mode.
3.3.6.7
Command Name Command Description
CtrlCache Use this command to enable or disable controller cache.
Parameter 1 Parameter Description
<Enable:Disable> Enable/Disable controller cache.
3.3.6.8
Command Name Command Description
SyncCacheMode Use this command to enable or disable Synchronize Cache mode.
Parameter 1 Parameter Description
<Enable:Disable> Enable/Disable Synchronize Cache mode.