Filter
Top Products
Appendix B Notices86
English
• This device complies with RSS 210 of Industry Canada.
Europe - EU Declaration of Conformity
This device complies with the standards listed below, following the provisions
of the EMC Directive 89/336/EEC:
• ETSI EN 301 489-1/17
• ETSI EN 300 328-2
USA - Federal Communications Commission (FCC)
This device complies with Part 15 of FCC Rules. Operation of the devices in an
Wireless LAN System is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference that may cause undesired
operation.
Exposure to Radio Frequency Radiation
The radiated output power of the Wireless module is far below the FCC radio
frequency exposure limits. Nevertheless, the Wireless module shall be used in
such a manner that the potential for human contact during normal operation
is minimized.
The transmitter and the antenna are permanently installed inside the system,
and are specific for this model (not for generic computer). The antenna of this
device is installed on the top of the LCD display. For compliance with FCC
radiation exposure limits. it
should be operated with a separation distance of 20cm or more between the
antenna and the body of the user, and the antenna should not be operated
next to a nearby person.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
Bt2811`F/cppl!!Qbhf!97!!Uvftebz-!Nbsdi!22-!3114!!22;5:!BN