Acer 2310 Series Laptop User Manual


 
23
English
Frequently-asked questions
The following is a list of possible situations that may arise during the
use of your computer. Easy answers and solutions are provided for
each one.
I pressed the power button and opened the display, but the
computer does not start or boot-up.
Look at the power indicator:
If it is not lit, no power is being supplied to the computer. Check
the following:
If you are running on battery power, it may be low and unable
to power the computer. Connect the AC adaptor to recharge
the battery pack.
Make sure that the AC adaptor is properly plugged into the
computer and to the power outlet.
If it is lit, check the following:
Is a non-bootable (non-system) disk in the external USB floppy
drive? Remove or replace it with a system disk and press <Ctrl>
+ <Alt> + <Del> to restart the system.
Nothing appears on the screen.
The computer's power management system automatically blanks the
screen to save power. Press any key to turn the display back on.
If pressing a key does not turn the display back on, three things might
be the cause:
The brightness level might be too low. Press <Fn> + <> (increase)
to adjust the brightness level.
The display device might be set to an external monitor. Press the
display toggle hotkey <Fn> + <F5> to toggle the display back to
the computer.
If the Sleep indicator is lit, the computer is in Sleep mode. Press
and release the power button to resume.
Image is not full-screen.
Each computer display has a different native resolution depending on
the size of the screen. If you set the resolution lower than this native