Filter
Top Products
39
English
Installing memory
Follow these steps to install memory:
1 Turn off the computer, unplug the AC adaptor (if connected) and
remove the battery pack. Then turn the computer over to access
its base.
2 Remove the screws from the memory cover; then lift up and
remove the memory cover.
3 (a) Insert the memory module diagonally into the slot, then (b)
gently press it down until it clicks into place.
Note: The above image is for reference purposes only. The exact
location of the memory cover will vary depending on the model.
4 Replace the memory cover and secure it with the screw.
5 Reinstall the battery pack, and reconnect the AC adaptor.
6 Turn on the computer.
The computer automatically detects and reconfigures the total
memory size. Please consult a qualified technician or contact your local
Acer dealer.
BIOS utility
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you
do not need to run this utility. However, if you encounter
configuration problems, you may need to run it.