Filter
Top Products
44
English
Re-install bundled software without CD
Acer eRecovery stores pre-loaded software internally for easy driver
and application re-installation.
1 Boot to Windows
®
XP.
2 Press <Alt> + <F10> to open the Acer eRecovery utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery window, select Recovery actions and
click Next.
5 In the Recovery settings window, select Reinstall applications/
drivers and click Next.
6 Select the desired driver/application and follow the instructions on
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.
Change password
Acer eRecovery and Acer disk-to-disk recovery are protected by a
password that can be changed by the user. Follow the steps below to
change the password in Acer eRecovery.
1 Boot to Windows
®
XP.
2 Press <Alt>+<F10> to open the Acer eRecovery utility.
3 Enter the password to proceed. The default password is six zeros.
4 In the Acer eRecovery window, select Recovery settings and
click Next.
5 In the Recovery settings window, select Password: Change Acer
eRecovery password and click Next.
6 Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, you can
run Acer disk-to-disk recovery to restore the factory default image
under DOS mode.