Filter
Top Products
36 Chapter 1
Surface Treatment Hard coating(3H) glare
type/anti-glare type
Hard coating(3H) glare
type/anti-glare type
Hard coating(3H)
glare type/anti-glare
type
Typical White Luminance (cd/m
2
)
also called Brightness
180(Typical) 200(Center Typical) 200(Typical)
Contrast Ratio 400 :1(Min) 300:1(Min) 500(Typical)
Response Time (Optical Rise
Time+Fall Time)msec
25(Typical)
35(Max)
50(Max) 25(Typical)
35(Max)
Normal Input Voltage of Power
Supply
+3.3V(Typical) +3.3V(Typical) +3.3V(Typical)
Power Consumption (watt) 4.5(Typical) 4.8(Typical) 3.66(typ) IL=6.0
Weight 280g (0.5mm glass) 250g 260(Typical)
Physical Size(mm) 275.82(H)x178(V)x5.2(
D) (Max)
275..82(H)x178(V)x5.2(
D)(Max)
275.8(H)x178(V)x4.9(
D)(Typical)
Electrical Interface 1 channel LVDS LVDS interface
system(H-Sync, V-
Sync)
3.3V LVDS with 1
pixel/clock
Support Color Native 262K colours 256K colors Native 262K colours
Viewing Angle (degree)
Horizontal: Right/Left
Vertial: Upper/Lower
40/40
10/30
45/45
15/35
45/45
20/45
Temperature Range( C)
Operating
Storage (shipping)
0 to +50
-40 to +60
0 to +50
-25 to +60
0 to +50
-25 to +60
Item Specification
Vendor & model name LITEON-65W, PA-1650-02 QY YELLOW 1.7X5.5X11 LF
Input Requirements
Maximum input current (A,
@100Vac, full load)
1.6A @100Vac input and maximum load
Nominal(Rated) frequency
(Hz)
50 or 60 and single phase
Frequency variation range
(Hz)
47 - 63
Nominal voltages (Vrms) 100-127(low range)
200-240(high range)
Efficiency High efficiency 83% minimum, full load, warm-up condition.
Output Ratings (CV mode)
Rated output voltage Offers rated output voltage 19.0V
Voltage Range 18.05V to 19.95V
Noise + Ripple 380mV
Rated Power 65Watts continuously at all specified conditions
Output current 0 A (min.) to 4.74A (max.)
Dynamic Output Characteristics
Start-up time Shall less than 5 sec
12.1” LCD Panel
Item Specification
°