Filter
Top Products
Chapter 3 69
6. Disconnect the MDC cable from the MDC board.
Removing the audio module
1. Remove the screw that secures the audio board.
2. Remove the audio board from the mainboard.
Removing the mainboard from lower case
1. Press the button and remove the dummy card from the PCMCIA card slot.
2. Disconnect the speaker cable from the mainboard.
3. Disconnect the microphone cable from the mainboard.
4. Remove the four screws that secure tha mainboard.
5. Detach the mainboard from the lower case.
6. Disconnect the power board cable from the mainboard and remove the power board from the mainboard.
Speaker cable
Microphone cable