Filter
Top Products
Chapter 3 71
LCD module disassembly
1. Remove the six screw pads.
2. Remove the six screws that secure the LCD bezel.
3. Release the latches one by one. Please note that the bezel is fragile. Need to follow the following
disassembly pictures from left to right.
4. Pull the bezel a little bit forward that paralleled LCD cover and remove the LCD bezel.
5. Pull the inverter board out.
6. Disconnect the LVDS cable from the inverter board.
7. Disconnect the LCD cable from the inverter board.
8. Remove the inverter board.
9. Remove the four screws that secure the LCD and disconnect the CCD cable.
10. Remove the LCD from the cover assembly.
11. Remove the screw securing the CCD.
12. Remvoe the CCD from the cover assembly.